Hỗ Trợ Khách Hàng

Liên hệ : 0938.07.00.68

Liên hệ : 0906.68.81.04

Danh mục sản phẩm

Tin tức nổi bật

Hãng Weintek ngưng sản xuất model MT8071iP thay bằng MT8072iP

GIỚI THIỆU VỀ THƯƠNG HIỆU FATEK TAIWAN

Thông báo : WEINTEK ngưng sản xuất dòng MT6000 chuyển qua dòng mới MT8000

GIỚI THIỆU 2 LOẠI MÀN HÌNH SAMKOON SK-070HE VÀ SK102HE THÔNG DỤNG GIÁ RẼ

Chuyển đổi màn hình MT6070iP, MT607iP, MT6070iH qua màn hình MT8071iP

Khuyến mãi Bộ Nguồn MEANWELL các loại: LRS-350-12, LRS-350-24, NES-350-12, NES-350-24...

Dịch Vụ

Xem tiếp

Thay Cảm Ứng, LCD, Sửa Bo Mạch cho các loại màn hình HMI Công Nghiệp

Nhận thay thế sửa chữa các lỗi màn hình HMI Công nghiệp...

Xem tiếp

Lập trình, viết chương trình điều khiển cho các loại máy móc công nghiệp, thiết kế thi công các loại công tủ điện

Dịch vụ lập trình các loại PLC, HMI - Thiết kế thi công các loại tủ điện công nghiệp...

Xem tiếp

Dịch vụ kỹ thuật: Bảo trì , sửa chữa, lắp đặt, lập trình

* Sửa chữa: Servo, Biến tần, PLC, Board mạch, Các thiết bị điện công nghiệp, các loại máy... * Lập trình cải tạo chuyển qua tự động hóa cho các loại máy: mắt cắt bao bì PE, PP, Carton, máy cắt dán 3 biên, lập trình thang máy,... * Tư vấn, thi công , lắp đặt các loại tủ điện công nghiệp

Xem tiếp

Pro-face AST3201-A1-D24

(1 đánh giá)

Mã sản phẩm : AST3201-A1-D24

Xuất xứ : Proface

Bảo hành : 12 tháng

Liên hệ: 0938.070.068 Mr Dũng Mail: dung0938070068@gmail.com Skype: dung0938070068

LH: 0938070068

THÔNG TIN SẢN PHẨM

Liên hệ: 0938.070.068 Mr Dũng Mail: dung0938070068@gmail.com Skype: dung0938070068

Display Type		Monochrome Amber/Red LCD
Display Size		3.8"
Resolution		320 x 240 pixels (QVGA)
Dot pitch		W0.24 x H0.24 mm [W0.01 x H0.01 in.]
Effective Display Area		W78.8 x H59.6 mm [W3.10 x H2.35 in.]
Display Colors		Monochrome (8 Levels)
Backlight		Amber/Red LED (User nonreplaceable parts. Factory replacement required.)
Brightness Control		16 Levels (Adjusted with the touch panel)
Contrast Control		8 Levels (Adjusted with the touch panel)
Backlight Service Life		50,000 hrs. or more (continuous operation at 25℃ before backlight brightness decreases to 50%)
Language Fonts		Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean fonts, Simplified Chinese and Traditional Chinese fonts are downloadable.
Character Sizes		Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 127 pixel fonts, Image font: 8 to 72 pixel fonts
Font Sizes		Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.
Text	8 x 8 dots	40 char. x 30 rows
	8 x 16 dots	40 char. x 15 rows
	16 x 16 dots	20 char. x 15 rows
	32 x 32 dots	10 char. x 7 rows
Application Memory		FLASH EPROM 6 MB
Data Backup		SRAM 320KB (uses lithium battery)
Clock Accuracy		±65 sec/month (deviation at room temperature and power is OFF)
Touch Panel Type		Resistive Film (analog)
Touch Panel Resolution		1,024 x 1,024
Touch Panel Service Life		1,000,000 times or more
Interface	Serial (COM1)	RS-232C, Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Even or Odd, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, Connector: D-Sub9 (plug)
	Serial (COM2)	RS-422/485, Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Even or Odd, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, 187.5kbps (MPI), Connector: D-Sub9 (plug)
	USB (TYPE-A)	Conforms to USB1.1 (TYPE-A) x 1, Power Supply Voltage: DC 5 V ±5 %, Output Current: 500 mA or less, Communication Distance: 5 m or less

Other font sizes can be set up with the Editor software.
Capacity available for user application.
A Lithium battery's lifetime is:
10 years when the battery's ambient temperature is 40 ^oC or less.
4.1 years when the battery's ambient temperature is 50 ^oC or less.
1.5 years when the battery's ambient temperature is 60 ^oC or less.
When used for back up: Approximately 100 days, with a fully charged battery.
Approximately 6 days, with a half-charged battery.
Depending on the operating temperature and age of unit, the clock can deviate from -380 to +90 sec/month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.

General Specification


Rated Input Voltage			DC 24 V
Input Voltage Limits			DC 19.2 to 28.8 V
Allowable Voltage Drop			2 ms or less
Power Consumption			13 W or less
In-Rush Current			60 A or less
Voltage Endurance			AC 1,000 V, 20 mA for 1 min (between charging and FG terminals)
Insulation Resistance			DC 500 V, 10 MΩ or more (between charging and FG terminals)
Surrounding Air Temperature			0 to 50 ℃
Storage Temperature			-20 to +60 ℃
Ambient Humidity			10 to 90 % RH (Wet bulb temperature: 39 ℃ or less - no condensation.)
Storage Humidity			10 to 90 % RH (Wet bulb temperature: 39 ℃ or less - no condensation.)
Dust			0.1 mg/m³ or less (non-conductive levels)
Pollution Degree			For use in Pollution Degree 2 environment
Atmosphere			Free of corrosive gases
Air Pressure (altitude range)			800 to 1,114 hPa (2,000 m above sea level or less)
Vibration Resistance			IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration: 9.8 m/s², X, Y, Z directions for 10 cycles (100 min)
Concussion Resistance			IEC/EN61131-2 compliant, 147 m/s², X, Y, Z directions for 3 times
Noise Immunity			Noise Voltage: 1,000 Vp-p, Pulse Duration: 1 µs, Rise Time: 1 ns, (via noise simulator)
Electrostatic Discharge Immunity			Contact Discharge Method: 6 kV (IEC/EN61000-4-2 Level 3)
Grounding			Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country's applicable standard. (Same for FG and SG terminals)
Structure			Equivalent to IP65f NEMA #250 TYPE 4X/13 (on the front panel when properly installed in an enclosure)
Installation Configuration			Embedded panel
Cooling Method			Natural air circulation
Weight Approx.			0.4 kg [0.9 lb] or less (display unit only)
External Dimensions			W130 x H104 x D40 mm [W5.12 x H4.09 x D1.57 in.]
Panel Cut Dimensions			W118.5 x H92.5 mm [W4.67 x H3.64 in.], Panel thickness area: 1.6 to 5 mm [0.06 to 0.2 in.]

When using in an environment where the temperature becomes or exceeds 40 ℃ for an extended period of time, the screen contrast level may decrease from its original level of brightness.
The front face of the GP unit, installed in a solid panel, has been tested using, conditions equivalent to the standards shown in the specification. Even though the, GP unit's level of resistance is equivalent to these standards, oils that should have, no effect on the GP can possibly harm the unit. This can occur in areas where either, vaporized oils are present, or where low viscosity cutting oils are allowed to adhere, to the unit for long periods of time. If the GP's front face protection sheet becomes, peeled off, these conditions can lead to the ingress of oil into the GP and separate, protection measures are suggested., Also, if non-approved oils are present, it may cause deformation or corrosion of the, front panel’s plastic cover. Therefore, prior to installing the GP be sure to confirm the, type of conditions that will be present in the GP's operating environment., If the installation gasket is used for a long period of time, or if the unit and its gasket, are removed from the panel, the original level of the protection cannot be guaranteed., To maintain the original protection level, be sure to replace the installation gasket, regularly.
Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.].

External Dimensions / Interfaces / Panel Cut-out / Cable Attached Dimensions

Đánh giá sản phẩm

Bình chọn sản phẩm:

Sản phẩm cùng loại

Proface AST3501-C1-AF, AST3501-C1-D24, AST3501-T1-AF, AST3501-T1-D24

LH: 0938070068

Proface AST3401-T1-D24

LH: 0938070068

Proface AST3302-B1-D24

LH: 0938070068

Proface AST3301-B1-D24, AST3301-S1-D24, AST3301-T1-D24

LH: 0938070068